Yes. The Inspo Max features a 510-thread connection and works with both standard cartridges and Randy’s Sand Quartz Atomizer (sold separately [available here]).

Nope! You can use any 510-compatible item with Inspo Max.

Just like a cartridge. You can install or remove the Sand Quartz Atomizer by simply screwing or unscrewing it from the 510-threaded port in the Inspo’s magnetic base.

To load your Atomizer, unscrew the metal pieces from each other and add a small amount of your favorite concentrate before reassembling.

Press the power button 5 times quickly (within 1.5 seconds) to turn the Inspo Max on. It will auto power off after 10 seconds of no use.

The Inspo Max will auto power off after 10 seconds of no use.

Press the power button 2 times quickly to start preheating. Preheating lasts for 8 seconds. Pressing any button during this time will stop preheating.

• Press the button once to raise the voltage by 0.1V
• Hold the button to raise the voltage faster
• When the voltage reaches 4.2V release the button. Press it again to reset back to 1.8V
• Default voltage is 2.8V

You may have added too much material to your atomizer. If you are using prefilled carts – then it is most likely a with your cartridge not  the Inspo Max.

The best product to clean your Inspo Max and any atomizer that you are using with it is our Randy’s Swipe (presoaked alcohol cotton swab). Make sure all connection points stay clean to ensure a solid connection.