Press power button 5 times within 5 seconds to power on/off.

Press power button 2 times in a row. The device will vibrate once.
During preheating, the gear light breathes, and the ambient light changes colors. After reaching the set temperature, it vibrates once, and the ambient light stays green for 28 seconds.
The flame light will flash and the four grids around the flame light up clockwise for 28 seconds. Then the light will go out and the device will vibrate, indicating the end of the session.

Press power button 3 times in a row to cycle through temperatures.

Yellow – 400°

Green– 440°

Red– 480°

Blue– 500°

Fill Glass bubbler with water no higher than the max line. Do not fill glass while attached to battery.

Regular cleaning and maitenance of your Grip+ is highly recommended for best long-term function. To clean your Grip+ glass components, you should try Randyʼs Black Label glass cleaner.

Do not use Black Label on coil.

For coils try Randy’s Res-Tips, Swipes, or snaps.

The airflow hole at the bottom of the bubbler must align precisely with the arrow on the device body. Any misalignment may result in airflow blockage.