Yes. The ZInspo features a 510-thread connection and works with both standard cartridges and Randy’s Sand Quartz Atomizer (sold separately [available here]).

Nope! You can unscrew the atomizer to use any 510-compatible item with ZInspo.

Just like a cartridge. You can install or remove the Sand Quartz Atomizer by simply screwing or unscrewing it from the 510-threaded port in the Inspo’s magnetic base.

To load your Atomizer, unscrew the metal pieces from each other and add a small amount of your favorite concentrate before reassembling.

Take quick draws, or click the button on the bottom of ZInspo 5 times to turn the device on. (ZInspo will default to power on status after connection, no auto power off.)

Take two quick draws or press the button two times. The light will pulse with color. Preheating lasts 15 seconds at a steady voltage and stops if you use any other function. 

You may have added too much material to your atomizer, restricting all airflow, use smaller portions of your concentrate and try again

You may have added too much material to your atomizer. If you are using prefilled carts – then it is most likely a with your cartridge not  the ZInspo.

The best product to clean your ZInspo and any atomizer that you are using with it is our Randy’s Swipe (presoaked alcohol cotton swab). Make sure all connection points stay clean to ensure a solid connection.